1. Verdi command line¶
This part of the tutorial will familiarize you with the
verdi command-line interface (CLI),
which lets you manage your AiiDA installation, inspect the contents of your database, control running calculations and more.
verdicommand supports tab-completion: In the terminal, type
verdi, followed by a space and press the ‘Tab’ key twice to show a list of all the available sub commands.
For help on
verdior any of its subcommands, simply append the
-h/--helpflag, e.g.:verdi quicksetup -h
More details on
verdi can be found in the online documentation.
1.1. Setting up a profile¶
After installing AiiDA, the first step is to create a “profile”. Typically, you would be using one profile per independent research project.
The easiest way of setting up a new profile is through
Let’s set up a new profile that we will use throughout this tutorial:
This will prompt you for some information, such as the name of the profile, your name, etc. The information about you as a user will be associated with all the data that you create in AiiDA and is important for attribution, when you start sharing your data with others. After you have answered all the questions, a new profile will be created, along with the required database and repository.
verdi quicksetup is a user-friendly wrapper around the
verdi setup command that provides more control over the profile setup.
As explained in the documentation,
verdi setup expects certain external resources, such as the database to already have been pre-configured.
verdi quicksetup will try to do this for you, but may not be successful in certain environments.
To see this profile, and any others that may have been configured, run:
verdi profile list Info: configuration folder: /home/max/.aiida * generic quicksetup
quicksetup in this example, corresponds to a profile.
The one marked with an asterisk is the “default” profile, meaning that any
verdi command that you execute will be applied to that profile.
The output you get may differ.
generic profile is pre-configured on the virtual machine and built only for the first part of the tutorial.
Let’s change the default profile to the newly created
quicksetup for the rest of the tutorial:
verdi profile setdefault quicksetup
From now on, all
verdi commands will apply to the
To quickly perform a single command on a profile that is not the default, use the
verdi -p generic code list will display the codes for the
generic profile, despite it not being the current default profile.
1.2. Importing data¶
Before we start running calculations ourselves, we are going to look at an AiiDA database already created by someone else. Let’s import one from the web (due to slow network from Japan to Europe, we temporarily put the aiida data on Kyoto university web server):
verdi import http://phonondb.mtl.kyoto-u.ac.jp/aiida_tutorial/aiida_tutorial_2019_05_perovskites_v0.3.aiida
But the original data is found here:
Contrary to most databases, AiiDA databases contain not only results of calculations but also their inputs and information on how a particular result was obtained. This information, the data provenance, is stored in the form of a directed acyclic graph (DAG). In the following, we are going to introduce you to different ways of browsing this graph and will ask you to find out some information regarding the database you just imported.
1.3. Your first AiiDA graph¶
Fig. 1.9 shows a typcial example of a calculation represented in an AiiDA graph. Have a look to the figure and its caption before moving on.
Fig. 1.9 was created manually but you can generate a similar graph automatically by passing the identifier of a calculation node to
verdi node graph generate <IDENTIFIER>.
Identifiers in AiiDA come in three forms:
“Primary Key” (PK): An integer, e.g.
723, that identifies your entity within your database (automatically assigned)
Universally Unique Identifier (UUID): A string, e.g.
ce81c420-7751-48f6-af8e-eb7c6a30cec3that identifies your entity globally (automatically assigned)
Label: A human-readable string, e.g.
verdi command that expects an identifier will accept a PK, a UUID or a label (although not all entities have a label by default).
While PKs are often shorter than UUIDs and can be easier to remember, they are only unique within your database.
Whenever you intend to share your data with others, use UUIDs to refer to nodes.
For UUIDs, it is sufficient to specify a subset (starting at the beginning) as long as it can already be uniquely resolved.
For more information on identifiers in
verdi and AiiDA in general, see the documentation.
For the remainder of this section, fields enclosed in angular brackets, such as
<IDENTIFIER>, are placeholders that you should replace before executing the command.
With that in mind, let’s generate a graph for the calculation node with UUID
verdi node graph generate <IDENTIFIER>
This command will create a file with the naming scheme
<PK>.dot.pdf that can be viewed with any PDF document viewer.
You can open this file on the Materials Cloud VM by using
evince or, if the ssh connection is too slow, copy it via
scp to your local machine.
To do so, if you are using Linux/Mac OS X, you can type in your local machine:
scp aiidatutorial:<path_with_the_graph_pdf> <local_folder>
and then open the file.
1.4. The provenance browser¶
verdi CLI provides full access to the data underlying the provenance graph, a more intuitive tool for browsing AiiDA graphs is the interactive provenance browser available on Materials Cloud.
In order to use it, we first need to start the AiiDA REST API:
verdi restapi * Serving Flask app "aiida.restapi.run_api" (lazy loading) * Environment: production WARNING: Do not use the development server in a production environment. Use a production WSGI server instead. * Debug mode: off * Running on http://127.0.0.1:5000/ (Press CTRL+C to quit)
Now you can connect the provenance browser to your local REST API:
Open the provenance explorer on your laptop
In the form, paste the (local) URL
http://127.0.0.1:5000/api/v4of our REST API
If you can’t see any useful information, please ask to tutors, because restapi v4 may have some issue on the day of this tutorial.
In order for this to work on your laptop, while the REST API is running on the virtual machine, we’ve enabled SSH tunneling for port
5000 in Connect to your virtual machine.
Start by clicking on the Details of a
CalcJobNode and use the graph explorer to complete the exercise below.
If you ever get lost, just go to the “Details” tab, enter
ce81c420-7751-48f6-af8e-eb7c6a30cec3 and click on the “GO” button.
Use the provenance browser in order to figure out:
When was the calculation run and who run it?
Was it a serial or a parallel calculation? How many MPI processes were used?
What inputs did the calculation take?
What code was used and what was the name of the executable?
How many calculations were performed using this code?
Anything that ‘runs’ in AiiDA, be it calculations or workflows, is considered a
To get a list of currently running processes, use:
verdi process list
The first time you run this command, it might take a few seconds. Subsequent calls will be faster.
which should be empty:
PK Created Process label Process State Process status ---- --------- -------------- --------------- ---------------- Total results: 0 Info: last time an entry changed state: never
Let’s see whether there are any finished processes in the database by passing the
verdi process list -S finished
This command will list all the processes that have a process state
Finished and should look something like:
PK Created Process label Process State Process status ---- --------- --------------- --------------- ---------------- 648 1872D ago PwCalculation ⏹ Finished  1333 1872D ago PwCalculation ⏹ Finished  1273 1872D ago PwCalculation ⏹ Finished  971 1872D ago PwCalculation ⏹ Finished  488 1872D ago PwCalculation ⏹ Finished  1869 1872D ago PwCalculation ⏹ Finished  ... Total results: 171 Info: last time an entry changed state: never
Processes can be in any of the following states:
The first three states are ‘active’ states, meaning the process is not done yet, and the last three are ‘terminal’ states. Once a process is in a terminal state, it will never become active again. The official documentation contains more details on process states.
In order to list processes of all states, use the
verdi process list -a
This command will list all the processes that have ever been launched.
As your database will grow, so will the output of this command.
To limit the number of results, you can use the
-p/--past-days <NUM> option, that will only show processes that were created
NUM days ago.
For example, this lists all processes launched since yesterday:
verdi process list -a -p1
Each row of the output identifies a process with some basic information about its status.
For a more detailed list of properties, you can use
verdi process show, but to address any specific process, you need an identifier for it.
Let’s revisit the process with the UUID
ce81c420-7751-48f6-af8e-eb7c6a30cec3, this time using the CLI:
verdi process show ce81c420-7751-48f6-af8e-eb7c6a30cec
Producing the output:
Property Value ----------- ------------------------------------ type PwCalculation state Finished  pk 630 uuid ce81c420-7751-48f6-af8e-eb7c6a30cec3 label description ctime 2014-10-27 17:51:21.781045+00:00 mtime 2019-05-09 14:10:09.307986+00:00 computer  daint Inputs PK Type ---------- ---- ------------- pseudos Ba 1092 UpfData O 1488 UpfData Ti 1855 UpfData code 631 Code kpoints 498 KpointsData parameters 629 Dict settings 500 Dict structure 1133 StructureData Outputs PK Type ----------------------- ---- ------------- output_kpoints 1455 KpointsData output_parameters 789 Dict output_structure 788 StructureData output_trajectory_array 790 ArrayData remote_folder 1811 RemoteData retrieved 787 FolderData
You can use the PKs shown for the inputs and outputs to get more information about those nodes.
Since the inputs and outputs are
Data nodes, not
Process nodes, use
verdi node show instead.
1.5.1. Dict and CalcJobNode¶
Let’s investigate some of the nodes appearing in the graph.
From the inputs of the process, let’s choose the node of type
Dict with input link name
parameters and type in the terminal:
verdi data dict show <IDENTIFIER>
<IDENTIFIER> is the PK of the node.
Dict contains a dictionary (i.e. key–value pairs), stored in the database in a format ready to be queried.
We will learn how to run queries later on in this tutorial.
The command above will print the content dictionary, containing the parameters used to define the input file for the calculation.
You can compare the dictionary with the content of the raw input file to Quantum ESPRESSO (that was generated by AiiDA) via the command:
verdi calcjob inputcat <IDENTIFIER>
where you provide the identifier of the calculation node.
Check the consistency of the parameters written in the input file and those stored in the
Even if you don’t know the meaning of the input flags of a Quantum ESPRESSO calculation, you should be able to see how the input dictionary has been converted to Fortran namelists.
The previous command just printed the content of the ‘default’ input file
To see a list of all the files used to run a calculation (input file, submission script, etc.) instead type:
verdi calcjob inputls <IDENTIFIER>
--color flag allows you to easily distinguish files from folders by a different coloring.
Once you know the name of the file you want to visualize, you can call the
verdi calcjob inputcat [PATH] command specifying the path.
For instance, to see the submission script, you can do:
verdi calcjob inputcat <IDENTIFIER> _aiidasubmit.sh
Now let us focus on
StructureData objects, which represent a crystal structure.
We can consider for instance the input structure to the calculation we were considering before (it should have the UUID
Such objects can be inspected interactively by means of an atomic viewer such as the one provided by
AiiDA however supports several other viewers such as
Type in the terminal:
verdi data structure show --format ase <IDENTIFIER>
to show the selected structure, although it will take a few seconds to appear. You should be able to rotate the view with the right mouse button.
If you receive some errors, make sure you started your SSH connection with the
Alternatively – especially if viewing the structure over SSH is too slow – you can export the content of a structure node in various formats, such as
xsf, and then view them on your local machine.
For example, to view the file with the
xcrysden application, first export the structure node in the
# verdi data structure export --format xsf <IDENTIFIER> > <IDENTIFIER>.xsf verdi data structure export --format xsf 254e5a86 > 254e5a86.xsf
Then copy the
xsf-file to your local machine and open it with the
xcrysden --xsf 254e5a86.xsf
You will need to have the
xcrysden application installed on your local machine for this to work.
1.5.3. Codes and computers¶
Let us focus now on the nodes of type
A code represents (in the database) the actual executable used to run the calculation.
Find the identifier of such a node in the graph and type:
verdi code show <IDENTIFIER>
The command prints information on the plugin used to interface the code to AiiDA, the remote machine on which the code is executed, the path of its executable, etc. To show a list of all available codes type:
verdi code list
If you want to show all codes, including hidden ones and those created by other users, use
verdi code list -a -A.
Now, among the entries of the output you should also find the code just shown.
Similarly, the list of computers on which AiiDA can submit calculations is accessible by means of the command:
verdi computer list -a
-a flag shows all computers, also the one imported in your database but that you did not configure, i.e. to which you don’t have access.
Details about each computer can be obtained by the command:
verdi computer show <COMPUTERNAME>
Now you have the tools to answer the question: what is the scheduler installed on the computer where the calculations of the graph have run?
1.5.4. Calculation results¶
The results of a calculation can be accessed directly from the calculation node. Type in the terminal:
verdi calcjob res <IDENTIFIER>
which will print the output dictionary of the ‘scalar’ results parsed by AiiDA at the end of the calculation. Note that this is actually a shortcut for:
verdi data dict show <IDENTIFIER>
IDENTIFIER refers to the
Dict node attached as an output of the calculation node, with link name
By looking at the output of the command, what is the Fermi energy of the calculation with UUID
Similarly to what you did for the calculation inputs, you can access the output files via the commands:
verdi calcjob outputls <IDENTIFIER>
verdi calcjob outputcat <IDENTIFIER>
Use the latter to verify that the Fermi energy that you have found in the last step has been extracted correctly from the output file
Filter the lines containing the string ‘Fermi’, e.g. using
grep, to isolate the relevant lines.
The results of calculations are stored in two ways:
Dict objects are stored in the database, which makes querying them very convenient, whereas
ArrayData objects are stored on the disk.
Once more, use the command
verdi data array show <IDENTIFIER> to determine the Fermi energy obtained from calculation with the UUID
This time you will need to use the identifier of the output
ArrayData of the calculation, with link name
As you might have realized the difference now is that the whole series of values of the Fermi energy calculated after each relax/vc-relax step are stored.
The choice of what to store in
ArrayData nodes is made by the parser of
pw.x implemented in the
1.5.5. (Optional section) Comments¶
AiiDA offers the possibility to attach comments to a any node, in order to be able to remember more easily its details.
Node with UUID prefix
ce81c420 should have no comments, but you can add a very instructive one by typing in the terminal:
verdi node comment add "vc-relax of a BaTiO3 done with QE pw.x" -N <IDENTIFIER>
Now, if you ask for a list of all comments associated to that calculation by typing:
verdi node comment show <IDENTIFIER>
the comment that you just added will appear together with some useful information such as its creator and creation date.
We let you play with the other options of
verdi comment command to learn how to update or remove comments.
1.6. AiiDA groups of calculations¶
In AiiDA, calculations (and more generally nodes) can be organized in groups, which are particularly useful to assign a set of calculations or data to a common project. This allows you to have quick access to a whole set of calculations with no need for tedious browsing of the database or writing complex scripts for retrieving the desired nodes. Type in the terminal:
verdi group list -a -A
to show a list of all groups that exist in the database.
Choose the PK of the group named
tutorial_pbesol and look at the calculations that it contains by typing:
verdi group show <IDENTIFIER>
In this case, we have used the name of the group to organize calculations according to the pseudopotential that has been used to perform them. Among the rows printed by the last command you will be able to find the calculation we have been inspecting until now.
If instead you wanted to know all the groups to which a specific node belongs, use the
verdi group list -N <IDENTIFIER>